найти продукт:

Подробная информация
Спецификации и параметры
загрузки

Key Advantages:

• Exposed 4-electrode with 316 or C22 conductivity cell, calibration parameters are stored in the sensor.

• mV class AC drive, better polarization resistance, smaller drift.

• RS485 output, Modbus protocol.

• Titanium shell, suitable for a variety of complex applications

• IP68 connector.

• Exposed structure, easy to clean.

• Output water temperature, conductivity and salinity, TDS simultaneously.

Item Technical Specification
Measurement Method 4-electrodes AC drive
Range 1uS/cm~100mS/cm
Resolution 1uS/cm or 0.1mS/cm
Accuracy ±3% reading or ±0.2mS/cm w.i.g**
Operating temperature 5~45℃
Storage Temperature -10~50℃
Min. Detection Limitation 0.3uS/cm
Warranty 1 year
Depth IP68
Power DC5V 5%
Output RS485 and Modbus protocol
Material Titanium, 316 or C22, PEEK
Dimension Length 143mm(connector not included), diameter 16mm
Flow rate < 3 m/s
Response time Minimum 10s T90
Field life* 2 years or greater
Recommended Calibration maintain Frequency* 3 months

Note: *Field life and calibration frequency dependent on site conditions

**w.i.g which is greater

Online 4-electrode Conductivity sensor(diameter 16mm)

PN:630315
Broadsensor conductivity sensor measures conductivity by AC voltage applied to 316 or C22 electrodes. The sensor requires little maintenance or special attention for storage and can measure high conductivity water long-term.

телефон:0512-88960831
возвращение