Key Advantages:
-
Calibration parameters are stored in the sensor.
-
Easy to clean
-
Titanium electrode material, suitable for a variety of complex applications
-
MV class AC drive, better anti-polarization ability, less drift.
-
RS485 digital output, Modbus RTU protocol
-
IP68
-
TDS, salinity, temperature can also be monitored
| Item |
Technical Specification |
|---|---|
| Measurement Method | 4-electrodes AC drive |
| Range | 1uS/cm~100mS/cm |
| Resolution | 1uS/cm or 0.1mS/cm |
| Accuracy | 1%FS |
| Operating temperature |
5~45℃ |
| Storage Temperature |
-10~50℃ |
| Min. Detection Limitation |
0.3uS/cm |
| Warranty |
1 year |
| Depth |
IP68, 10m Max |
| Power |
DC 5~12V 15mA (normal) |
| Output |
RS485 and Modbus protocol |
| Material | SS316,Titanium |
| Dimension |
Length 186mm, diameter 22mm |
| Flow rate |
< 3 m/s |
| Response time |
Minimum 30s T90 |
| Field life* |
2 years or greater |
| Recommended Calibration maintain Frequency* |
3 months |
4-electrode Exposed Conductivity Sensor
Conductivity sensor is widely used around power sector, chemistry industry, environmental protection field, food safety field and marine studies. Our sensor increases a pair of driven electrodes, which can effectively avoid deviation and drift caused by polarization of electrode. Besides, we designed the conductance cell inside the sensor, so the maintenance intervals are much longer.
