Encuentra el producto:

introducción
especificaciones
descargas

Key Advantages:

  • Calibration parameters are stored in the sensor.

  • Easy to clean

  • Titanium electrode material, suitable for a variety of complex applications

  • MV class AC drive, better anti-polarization ability, less drift.

  • RS485 digital output, Modbus RTU protocol

  • IP68

  • TDS, salinity, temperature can also be monitored

Item Technical Specification
Measurement Method 4-electrodes AC drive
Range 1uS/cm~100mS/cm
Resolution 1uS/cm or 0.1mS/cm
Accuracy 1%FS
Operating temperature 5~45℃
Storage Temperature -10~50℃
Min. Detection Limitation 0.3uS/cm
Warranty 1 year
Depth IP68, 10m Max
Power DC 5~12V 15mA (normal)
Output RS485 and Modbus protocol
Material SS316,Titanium
Dimension Length 186mm, diameter 22mm
Flow rate < 3 m/s
Response time Minimum 30s T90
Field life* 2 years or greater
Recommended Calibration maintain Frequency* 3 months
Note: *Field life and calibration frequency dependent on site conditions

4-electrode Exposed Conductivity Sensor

PN: 630314
Conductivity sensor is widely used around power sector, chemistry industry, environmental protection field, food safety field and marine studies. Our sensor increases a pair of driven electrodes, which can effectively avoid deviation and drift caused by polarization of electrode. Besides, we designed the conductance cell inside the sensor, so the maintenance intervals are much longer.

Teléfono:0512-88960831
Regreso